Removal and Installation: Notes

• When removing or installing trunk lid, place a cloth or other padding on trunk lid. This prevents vehicle body from being scratched.
• Bumper fascia is made of plastic. Do not use excessive force and be sure to keep oil away from it.
• Trunk lid adjustment: Adjust at hinge-trunk lid portion for proper trunk lid fit.
• Trunk lid lock system adjustment: Adjust striker so that it is in the center of the lock. After adjustment, check trunk lid lock operation.
• After installation, make sure that trunk lid and fuel filler lid open smoothly.

* For Wiring Diagram, refer to " TRUNK LID AND FUEL FILLER LID OPENER  ".