Power Supply & Ground Circuit

Power is supplied at all times

• Through 7.5-amp fuse No. 5, located in the fuse block (J/B).
• To combination meter harness connector M40 at terminal No. 66.

With the ignition switching the ON or START position, power is supplied:

• Through 10-amp fuse No. 11, located in the fuse block (J/B).
• To combination meter harness connector M40 at terminal No. 62.

Ground is supplied:

• To combination meter harness connector M40 at terminal No. 59.
• Through body grounds M15, M71 and M76. For body ground locations, see WIRING DIAGRAMS  .