LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2001 >> QX4 RWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Testing >> Proportioning Valve >> Altima, Frontier 3.3L, Maxima, Pathfinder 2WD, QX4 2WD, Sentra & Xterra

Altima, Frontier 3.3L, Maxima, Pathfinder 2WD, QX4 2WD, Sentra & Xterra

Raise and support vehicle. On Frontier, Pathfinder, QX4 and Xterra, remove front left tire. On all models, using 2 pressure gauges, attach one to a front brake bleeder and one to a rear brake bleeder. Bleed air from front and rear pressure gauges. Depress brake pedal slowly until front brake pressure reading is achieved. Check rear brake pressure. See PROPORTIONING VALVE PRESSURE SPECIFICATIONS  table. If not within specification, replace dual proportioning valve (separated type) or master cylinder assembly (built-in type).

PROPORTIONING VALVE PRESSURE SPECIFICATIONS

Application Front Brake Applied Pressure psi (kg/cm2 ) Rear Brake Output Pressure psi (kg/cm2 )
Altima
SE 1067 (75) 640-697 (45-49)
Except SE 924 (65) 498-555 (35-39)
Frontier 924 (65) 498-555 (35-39)
Maxima 1067 (75) 739-796 (52-56)
Pathfinder 2WD, QX4 2WD 924 (65) 498-555 (35-39)
Sentra
1.8L 1067 (75) 740-796 (52-56)
2.0L (W/ABS) 924 (65) 597-654 (42-46)
2.0L (W/O ABS) 924 (65) 548-604 (38-42)
Xterra 924 (65) 498-555 (35-39)