RH Turn

When the turn signal switch is moved to the RH position, power is supplied from turn signal switch terminal 2 to

front fog lamp RH (turn signal) terminal 2

combination meter terminal 29

rear combination lamp RH terminal 5.

Ground is supplied to the front fog lamp RH (turn signal) terminal 3 through body grounds E13 and E41.

Ground is supplied to the rear combination lamp RH terminal 6 through body grounds B55 and B75.

Ground is supplied to combination meter terminal 30 through body grounds M4, M66 and M147.

With power and ground supplied, the combination flasher unit controls the flashing of the RH turn signal lamps.