System Description: Notes

The warning chime is controlled by the smart entrance control unit.

The warning chime is located in the smart entrance control unit.

Power is supplied at all times

through 7.5A fuse [No. 24, located in the fuse block (J/B)]

to smart entrance control unit terminal 10, and

to key switch terminal 2, and

through 10A fuse [No. 61, located in the fuse block (J/B)]

to tail lamp relay terminals 1 and 3.

With the ignition switch in the ON or START position, power is supplied through 7.5A fuse [No. 11, located in the fuse block (J/B)] to smart entrance control unit terminal 33.

Ground is supplied to smart entrance control unit terminal 16 through body grounds M77 and M111.