Consult-II Diagnostic Test Mode Function
CONSULT-II DIAGNOSTIC TEST MODE FUNCTION
| CONSULT-II DIAGNOSTIC TEST MODE | Description |
|---|---|
| C/U INITIALIZATION | When replacing any of the following three components, C/U initialization and re-registration of all IVIS (NATS) ignition keys are necessary. [IVIS (NATS) ignition key/IMMU/ECM] |
| SELF-DIAG RESULTS | Detected items (screen terms) are as shown in the chart HOW TO READ SELF-DIAGNOSTIC RESULTS . |
NOTE:
When any initialization is performed, all ID previously registered will be erased and all IVIS (NATS) ignition keys must be registered again.
The engine cannot be started with an unregistered key. In this case, the system will show "DIFFERENCE OF KEY" or "LOCK MODE" as a self-diagnostic result on the CONSULT-II screen.
In rare case, "CHAIN OF ECM-IMMU" might be stored as a self-diagnostic result during key registration procedure, even if the system is not malfunctioning.