Auto Stop Operation

With rear wiper switch turned OFF, rear wiper motor will continue to operate until wiper arm reaches rear wiper stopper.

When rear wiper arm is not located at rear wiper stopper with wiper switch OFF, ground is supplied

to rear wiper amp. terminal 10

through wiper motor terminals 7 and 8

through body grounds B11, B22 and D210.

Then rear wiper motor continues to operate until wiper arm reaches bottom.

When wiper arm reaches bottom, power is supplied

through 10A fuse [No. 29, located in the fuse block (J/B)]

through rear wiper motor terminals 6 and 7 and

through rear wiper amp. terminals 10 and 8

to rear wiper motor terminal 3.

Ground is supplied

to rear wiper motor 4

through rear wiper amp. terminal 11.

Then wiper motor turns the other way and wiper arm moves once until wiper arm reaches stopper.