LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2001 >> QX4 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Front Wiper And Washer - QX4 - Late - New >> Front Wiper And Washer >> Removal and Installation >> Wiper Linkage

Wiper Linkage

Fig 1: Removing Wiper Linkage
G03145086

Removal 

  1. Remove 4 bolts that secure wiper motor.
  2. Detach wiper motor from wiper linkage at ball joint.
  3. Remove wiper linkage.

Be careful not to break ball joint rubber boot. 

Installation 

Grease ball joint portion before installation.

  1. Installation is the reverse order of removal.
scientia non olet · About LEMON Manuals