System Description: Notes

With the ignition switch in the ON or START position, power is supplied

• through 7.5A fuse [No. [4], located in the fuse block (J/B)]
• to combination meter terminal (41).

Ground is supplied

• to combination meter terminal (39) and
• A/T device (OD control switch) terminal (2)
• through body grounds [M14] and [M47]

Ground is supplied

• to fuel level sensor unit terminal (4)
• through ECM terminal (129).

Ground is supplied

• seat belt buckle switch terminal (14)
• through body grounds [B22] and [B35].

Ground is supplied

• to brake fluid level switch terminal (2) and
• washer level switch terminal (2)
• through body grounds [E22] and [E36].