Axle Ratio & Identification
Manufacturer does not identify rear axle with a particular outside identification marking. Both models use same basic type of removable carrier rear axle. Ratio may be determined by dividing number of ring gear teeth by number of pinion gear teeth. See AXLE RATIO SPECIFICATIONS table.
AXLE RATIO SPECIFICATIONS
| Application | Ratio | |||||
|---|---|---|---|---|---|---|
| H190A | ||||||
| Frontier 2WD | ||||||
| Automatic Transmission (Except King Cab) | 3.889:1 | |||||
| Manual Transmission | ||||||
| Except King Cab | 3.545:1 | |||||
| King Cab | 3.700:1 | |||||
| 1997 Pickup 2WD (1) | ||||||
| Automatic Transmission | 4.111:1 | |||||
| Manual Transmission | 3.545:1 | |||||
| H233B (1) | ||||||
| 1997 Pickup 4WD | 4.625:1 | |||||
| Pathfinder | ||||||
| Narrow Body | 4.363:1 | |||||
| Wide Body | 4.636:1 | |||||
| Infiniti QX4 | 4.636:1 | |||||
|
||||||