Rear Axle & Suspension: Installation

1. Final tightening fasteners for rubber parts requires to be carried out under unladen condition with tires on ground. See Fig 1 .
   Fig 1: Identifying Fasteners To Be Final Tightened With Vehicle Unladen, With Tires On Ground

   Courtesy of NISSAN MOTOR CO., U.S.A.
2. When installing coil spring and lower spring seat, pay attention to its direction. See Fig 2 .
3. Be sure spring rubber seat is not twisted and has not slipped off when installing coil spring.

Fig 2: Installing Coil Spring & Lower Spring Seat

Courtesy of NISSAN MOTOR CO., U.S.A.