LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 1994 >> J30 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Testing >> Fuel Tank Sending Unit

Fuel Tank Sending Unit

  1. Remove sending unit from fuel tank. Measure resistance between terminals "G" (+) and "E" (-) of sending unit connector. See Fig 1 .
  2. Resistance values should change as position of fuel tank sending unit is changed. Resistance values should be as specified in FUEL TANK SENDING UNIT RESISTANCE (OHMS) table.
Fig 1: Identifying Fuel Tank Sending Unit Connector Terminals (J30)
G93C83347Courtesy of NISSAN MOTOR CO., U.S.A.
FUEL TANK SENDING UNIT RESISTANCE (OHMS)

Application Full Half Empty
J30 4-6 27-34 78-85
scientia non olet · About LEMON Manuals