LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 1993 >> J30 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Testing >> Fuel Tank Sending Unit

Fuel Tank Sending Unit

  1. Remove sending unit from fuel tank. Measure resistance between terminals "G" (+) and "E" (-) of sending unit connector. See Fig 1 .
  2. Resistance values should change as position of fuel tank sending unit is changed. Resistance values should approximately equal those on FUEL TANK SENDING UNIT RESISTANCE  table.
Fig 1: Fuel Tank Sending Unit Connector Terminal ID
G93C83347Courtesy of NISSAN MOTOR CO., U.S.A.
FUEL TANK SENDING UNIT RESISTANCE

Application Specification
Full 4-6 Ohms
Half 27-34 Ohms
Empty 78-85 Ohms
scientia non olet · About LEMON Manuals