LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 1992 >> G20 Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.0L 4-CYL - VIN [C] >> Removal & Installation >> Fuel Pressure Release

Fuel Pressure Release

  1. With ignition off, remove fuel pump fuse from fuse block, located below left side of instrument panel. See Fig 1 . Start engine, and allow it to idle until it stalls.
  2. Crank engine an additional 2-3 times to release residual fuel pressure. Turn ignition off. Reinstall fuel pump fuse.
Fig 1: Identifying Fuel Pump Fuse
G92I00420Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals