Rear Internal Gear, Forward Clutch Hub & Overrun Clutch Hub: Reassembly

1. Install forward one-way clutch on forward clutch hub with arrow facing forward. See Fig 1 . Apply petroleum jelly to end bearings and thrust washers. Install end bearing on forward one-way clutch.
2. Install thrust washer on rear internal gear. Align pawls of thrust washer with holes in rear internal gear. Install end bearing on rear internal gear. Install forward clutch hub on rear internal gear. Ensure forward clutch hub rotates counterclockwise only.
3. Install thrust washer on overrun clutch hub. Align pawls of thrust washer with holes in overrun clutch hub. Install overrun clutch hub on rear internal gear. Align projections of rear internal gear with holes in overrun clutch hub. Install snap ring to rear internal gear.

Fig 1: Checking Forward One-Way Clutch Rotation

Courtesy of NISSAN MOTOR CO., U.S.A.