LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 1992 >> G20 Automatic >> Repair and Diagnosis (Single Page) >> Steering >> Power Steering >> Steering System - Power >> Removal & Installation >> Steering Gear >> Removal (G20 & M30)

Removal (G20 & M30)

  1. Using Puller (HT72520000 ), remove tie rod ends from steering knuckle. Remove high and low hydraulic pressure connectors. Remove front exhaust tube, lower steering joint and gear housing brackets. See Figure or Figure .
  2. Support transmission housing using jack. Remove center member with engine mounting rear bracket. Remove steering gear assembly.