LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 1992 >> G20 Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 2.0L 4-CYL - VIN [C] >> Removal & Installation >> Front Cover Oil Seal >> Removal

Front Cover Oil Seal: Removal

  1. Raise and support vehicle. Remove lower engine cover. Remove right front wheel and engine side cover. Remove accessory drive belts. Remove crankshaft pulley retaining bolt.
  2. Using puller, remove crankshaft pulley. Pry front cover oil seal from front cover. Use care not to scratch front cover or crankshaft sealing surfaces. Note direction of oil seal installation.
scientia non olet · About LEMON Manuals