LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 1992 >> G20 Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> 2.0L 4-CYL - VIN [C] >> Removal & Installation >> Camshaft >> Inspection

Removal & Installation: Camshaft: Inspection

  1. Inspect components for damage. Measure camshaft lobe height, journal diameter, journal runout, bore diameter and oil clearance. Replace camshaft or cylinder head if not within specification. See CAMSHAFT  table under ENGINE SPECIFICATIONS.
  2. Install camshaft in cylinder head. Ensure end play is within specification. Replace camshaft/cylinder head if end play is not within specification. See CAMSHAFT  table under ENGINE SPECIFICATIONS.
  3. Install camshaft sprockets. Using dial indicator, check camshaft sprocket runout near timing chain area on face of camshaft sprocket. Replace camshaft sprocket if runout exceeds .0098" (.249 mm).
scientia non olet · About LEMON Manuals