Brake Pedal Height
Check brake pedal free height ("H") and depressed height ("D") from melt sheet on floor panel to top of brake pedal pad. See Fig 1. See BRAKE PEDAL HEIGHT table. To adjust brake pedal height, loosen lock nut and turn brake booster input rod. Tighten lock nut. Ensure rod tip stays inside input rod clevis.
BRAKE PEDAL HEIGHT
| Application | In. (mm) | ||||
|---|---|---|---|---|---|
| G20 | |||||
| Free Height | |||||
| Automatic Transaxle | 6.26-6.65 (159-169) | ||||
| Manual Transaxle | 5.94-6.34 (151-161) | ||||
| Depressed Height (1) | |||||
| Automatic Transaxle | 3.35 (85) | ||||
| Manual Transaxle | 3.15 (80) | ||||
| M30 | |||||
| Free Height | 7.83-8.23 (199-209) | ||||
| Depressed Height (1) | 4.33 (110) | ||||
| Q45 | |||||
| Free Height | 7.24-7.64 (184-194) | ||||
| Depressed Height (1) | 4.13-4.53 (105-115) | ||||
|
|||||