LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Veloster Turbo R-Spec >> Repair and Diagnosis (Single Page) >> Brakes >> Anti-Lock Brakes >> Anti-Lock Brake System (Abs) >> Troubleshooting >> When Ignition Key Is Turned ON (Engine OFF), The ABS Warning Lamp Does Not Light Up >> Check the CAN Circuit Resistance For ABS Warning Lamp

Check the CAN Circuit Resistance For ABS Warning Lamp

  1. Disconnect the instrument cluster connector (M08) and turn the ignition switch OFF.
  2. Measure the resistance between terminal (M08) 32 and 33 of the cluster harness side connector.

    Specification  : 60Ω

    G13053509Courtesy of HYUNDAI MOTOR AMERICA
  3. Is resistance within specification?

    YES 

    • Repair ABS warning lamp bulb or instrument cluster assembly.

    NO 

    • Check the CAN circuit wiring for ABS warning lamp.
scientia non olet · About LEMON Manuals