LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Veloster Turbo R-Spec >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Forward Collision-Avoidance Assist Diagnosis >> DTC C180B-87: CAN Time-Out CGW1 >> DTC Information And Inspection >> Monitor DTC Status

Monitor DTC Status

  1. Plug GDS to Data Link Connector (DLC).
  2. Turn "ON" the ignition switch.
  3. Select "Diagnostic Trouble Codes (DTC)", and click "DTC Status" to check DTC information.
  4. Read the "DTC State" parameter.
  5. Is the DTC State "Present"?

    "PRESENT" 

    • If there is any DTC related to CAN BUS OFF or the Gateway system, repair it first and see if DTC C180B87 is cleared from the FCA/SCC module. Then go to next procedure.

    "HISTORY" 

scientia non olet · About LEMON Manuals