Switch CAN Communication Circuit Inspection
| Item | Normal Value | Prerequisite Condition | Probe (+) | Probe (-) |
|---|---|---|---|---|
| CAN Communication Circuit (open/short): resistance | Below 1Ω |
|
BSD ECU CAN High terminal | IGPM CAN High terminal |
| BSD ECU CAN Low terminal | IGPM CAN Low terminal | |||
|
IGPM CAN High terminal | EMS ECU CAN High terminal | ||
| IGPM CAN Low terminal | EMS ECU CAN Low terminal |
- Is the result within specifications?
YES
- Replace the IGPM or TCU with an usable one. If the IGPM or TCU works properly, replace the mirror and go to "VERIFICATION OF VEHICLE REPAIR ".
NO
- Inspect for an open in the CAN communication line between the BSD ECU and TCU.