LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Veloster 2.0, Standard Trans >> Repair and Diagnosis (Single Page) >> Electrical >> Body Electrical >> Wireless Power Charger Diagnosis >> DTC B1603-00: CAN Bus Off >> Wiring Inspection >> Terminal and Connector Inspection

Terminal and Connector Inspection

  1. Many malfunctions in the electrical system are caused by poor harness(es) and terminals. Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage.
  2. Thoroughly check all connectors (and connections) for looseness, bending, corrosion, contamination, deterioration, and/or damage.
  3. Has a problem been found?

    YES 

    NO 

    • Go to next procedure.
scientia non olet · About LEMON Manuals