LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Veloster 2.0, Standard Trans >> Repair and Diagnosis (Single Page) >> Brakes >> Anti-Lock Brakes >> Electronic Stability Program (Esp) System >> Troubleshooting >> Failure Diagnosis >> Even After The Engine Is Started, The ABS Warning Lamp Remains ON. >> Check The CAN Circuit Resistance For ABS Warning Lamp

Check The CAN Circuit Resistance For ABS Warning Lamp

  1. Disconnect the instrument cluster connector (M08) and turn the ignition switch OFF.
  2. Measure the resistance between terminal (M08) 32 and 33 of the cluster harness side connector.

    Specification  : 60Ω

  3. Is resistance Ω within specification?

    YES 

    • Repair ABS warning lamp bulb or instrument cluster assembly.

    NO 

    • Check the CAN circuit wiring for ABS warning lamp.
    G13053564Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals