LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Veloster 2.0, Standard Trans >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Rear Door Assembly >> Rear Door Belt Inside Weatherstrip >> Repair Procedures >> Replacement

Repair Procedures: Replacement

  1. Remove the rear door trim.

    (Refer to Rear Door - "REAR DOOR TRIM ")

  2. Remove the rear door belt inside weatherstrip (A).
    G13053733Courtesy of HYUNDAI MOTOR AMERICA
  3. To install, reverse removal procedure.

    Information 

    • When installing, install it by first contacting the inside part (basis point of assembly) of arrow to door frame.
    • Replace any damaged clips.
scientia non olet · About LEMON Manuals