Temperature Inspection when RH, LH Sensors are Released
| Item | Prerequisite condition | left-hand | Right hand |
|---|---|---|---|
| RH, LH sensor: overheated |
|
Below 105°C (released) | |
- Is the result within specifications?
YES
- Stop driving (cooling) and clear the DTC. (Record it as a History DTC)
- Repair relevant component(s) as necessary and go to "VERIFICATION OF VEHICLE REPAIR ".
NO
- Repeat the trouble shooting process until the sensor temperature falls back to the normal range. Then, go to "VERIFICATION OF VEHICLE REPAIR ".