C-CAN End Terminal Resistance Inspection
| Item | Normal value | Prerequisite condition | Probe (+) | Probe (-) |
|---|---|---|---|---|
| CAN communication circuit: resistance | Approx. 60Ω |
|
LKA CAN High terminal | LKA CAN Low terminal |
| Approx. 120Ω |
|
PCM CAN High terminal | PCM CAN Low terminal |
- Is the result within specifications?
YES
- Fault can be intermittent, caused by poor contact of connector or wire harness. Or, the control module's memory was not cleared after repair. Thoroughly check connectors for looseness, poor contact, bending, corrosion, deterioration, or damage.
- Repair relevant component(s) as necessary and go to "VERIFICATION OF VEHICLE REPAIR ".
NO
- Go to next procedure.