Switch CAN Communication Circuit Inspection
| Item | Normal Value | Prerequisite Condition | Probe (+) | Probe (-) |
|---|---|---|---|---|
| CAN Communication Circuit (open/short): resistance | Below 1Ω |
|
BSD ECU CAN High terminal | IGPM CAN High terminal |
| BSD ECU CAN Low terminal | IGPM CAN Low terminal |
- Is the result within specifications?
YES
- Diagnose the IGPM system using the GDS and see if there is a DTC related to the IGPM. If so, repair it first and then see if the DTC is cleared from the BSD module. Then, go to next procedure.
NO
- Repair an open in the CAN communication circuit between the BSD ECU and IGPM.