Switch CAN Communication Circuit Inspection
| Item | Normal Value | Prerequisite Condition | Probe (+) | Probe (-) |
|---|---|---|---|---|
| CAN Communication Circuit (open/short): resistance | Below 1Ω |
|
BSD ECU CAN High terminal | ESC CAN High terminal |
| BSD ECU CAN Low terminal | ESC CAN Low terminal |
- Is the result within specifications?
YES
- Replace the ESC with an usable one. If the ESC works properly, replace the ESC and go to "VERIFICATION OF VEHICLE REPAIR ".
NO
- Inspect for an open in the CAN communication line between the BSD ECU and ESC.