LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Veloster 2.0, Standard Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Blind Spot Collision Warning Diagnosis >> DTC C1611-87: CAN Time-Out EMS >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

Trouble shooting Condition Possible Cause
Main action
  • Monitor the EMS CAN signal
  1. Poor contact of connectors of each communication module
  2. Open/short in CAN communication circuit
  3. EMS (ECU)
Prerequisite condition
  • Battery voltage is normal
  • 1.5 sec. after turning the ignition switch on
  • Engine is running
Threshold value
  • An EMS CAN message was not received
Diagnosis time
  • after 2 sec.
scientia non olet · About LEMON Manuals