Switch CAN Communication Circuit Inspection
| Item | Normal Value | Prerequisite Condition | Probe (+) | Probe (-) |
|---|---|---|---|---|
| CAN Communication Circuit (open/short): resistance | Below 1Ω |
|
BSD LH CAN High terminal | BSD RH CAN High terminal |
| BSD LH CAN Low terminal | BSD RH CAN Low terminal |
- Is the result within specifications?
YES
- Replace the BSD ECU (RH or LH) with an usable one. If the BSD ECU (RH or LH) works properly, replace the mirror and go to "VERIFICATION OF VEHICLE REPAIR ".
NO
- Inspect for an open in the CAN communication line between the BSD ECU LH and BSD ECU RH.