Main Harness Circuit Inspection
| Item | Normal Value | Prerequisite Condition | Probe (+) | Probe (-) |
|---|---|---|---|---|
| Main harness Circuit Inspection (V) | 0V |
|
Airbag warning lamp terminal of the Cluster harness connector | Chassis ground |
- Is the measured Voltage within specifications?
YES
- Go to "CAN COMMUNICATION LINE INSPECTION " procedure.
NO
- Check airbag fuse, junction block, Warning Lamp, harness between junction block and SRSCM. Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.