Main Harness Circuit Inspection
| Item | Normal Value | Prerequisite Condition | Probe (+) | Probe (-) |
|---|---|---|---|---|
| Main harness Circuit Inspection (Ω) | Infinite |
|
"High" terminal of the PSIS harness connector | Chassis ground |
| "Low" terminal of the PSIS harness connector |
- Is the measured resistance within specifications?
YES
- Go to "COMPONENT INSPECTION " procedure.
NO
- Substitute the SRS main harness and check for proper operation. If the problem is corrected, replace SRS main harness and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.