DTC Information And Inspection: DTC Detecting Condition
| Item | Detecting Condition | Possible Cause | |
|---|---|---|---|
| DTC Strategy |
|
|
|
| Enable Conditions |
|
||
| Diagnostic Time | Qualification |
|
|
| De-Qualification |
|
||
- Ignition switch ON and OFF more than 3 times (3 consecutive ignition cycles has to be recognized).: Wait for 7 seconds when it's ON and 1 minute when it's OFF.
- Ignition switch OFF, connect GDS.
- Ignition switch ON and the Engine OFF, select "Diagnostic Trouble Codes (DTC)" mode.
- Is the DTC "B162000 Internal Fault-Replace SRSCM" present?