| DTC Strategy |
- Monitoring EPB Motor activation
|
- Faulty EPB Motor
- No Brake disc or pad
- Open or short in EPB Motor circuit
- Faulty Brake caliper assembled condition
|
| Enable Conditions |
- Ignition switch 'ON'
- Battery voltage is between 9 volts and 16 volts
- EPB Apply or Release
|
| Threshold Value |
- When the motor driving is continued for more than 15 seconds at apply
- When the motor driving is continued for more than 7 seconds at release
- The detection time of motor timeout is increase in diagnostic mode
|
| Warning Lamp |
|