LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Ioniq Hybrid SEL >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Parking Brake System Diagnosis (HEV) >> DTC C1614-08: CAN Time-Out HCU/VCU/FCU >> Wiring Inspection >> CAN Register and Communication Line Inspection >> CAN Register and Communication Line Inspection 2

CAN Register and Communication Line Inspection 2

  1. Ignition switch 'OFF'.
  2. Disconnect IGPM (Central Gate Way) connector.
  3. Measure resistance between terminal C-CAN Low and C-CAN High of IGPM (Central Gate Way) (Component side).

    Specification  : About 120 Ω

  4. Is the measured value within specification?

    YES 

    • Go to next procedure.

    NO 

    • If the measured value is out of specification, repair or replace 120 Ω CAN register (Inside of Cluster and IGPM (Central Gate Way)), and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.
scientia non olet · About LEMON Manuals