| DTC Strategy |
- Monitoring the Brake Lamp Switch signal
|
- Brake Lamp switch circuit open/short circuit
- Open or short in EPB Module CAN communication line
- Poor connection
- Faulty EPB ECM
|
| Enable Conditions |
- EPB wake-up (Ignition switch 'ON')
|
| Threshold Value |
- When the Brake Lamp Switch (BLS) CAN is not equal to the hardware BLS during 2 minutes
- When the TPS is more than 12% and the vehicle speed is more than 10 km/h (6.21 mi/h), the BLS continues high during 60 seconds
- During the 3 times both driving more than 40 km/h (24.85 mi/h) and stop, the BLS does not change
|
| Warning Lamp |
|