Precautions When Handling The Vehicle After An Accident

Be sure to wear insulated gloves (or rubber gloves), protective goggles, insulated suite, and insulated boots.
Do NOT touch bare cable under any condition. (Refer to "PRECAUTIONS TO TAKE WHEN HANDLING POWER CABLE ")
In case of vehicle fire, put out the fire with ABC extinguisher. Do NOT use water (usage of large volume of water is okay, but small volume can worsen the situation).
If more than half of the vehicle is submerged, then do NOT go near the Safety Switch or other high voltage related components. If such a component must be accessed, then move the vehicle to the safe location first before handling the component.
Gas is hydrogen and alkaline vapor. If the leakage is indoor, ventilate the area immediately and evacuate to a safe location.
If the leaked liquid comes in contact with skin, immediately neutralize the affected area with boric acid solution, then clean with tap water or saline solution.
Refer to "HIGH VOLTAGE SHUT-OFF PROCEDURES " if the high voltage needs to be cut off.