LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Ioniq Hybrid SEL >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System - General Information (HEV) >> Brake Bleeding Procedures >> Air Bleeding Tool Removal Procedure

Air Bleeding Tool Removal Procedure

  1. To remove the SST (09580-3D100) from the vehicle, close the air shut-off valve (A) first.
    G13850479Courtesy of HYUNDAI MOTOR AMERICA
  2. Remove SST (09580-3D100) and the cap of SST (0K585-e8100) on the reservoir tank.
    G13850480Courtesy of HYUNDAI MOTOR AMERICA
    NOTE:
    • To prevent backflow of brake fluid, be sure to open the air shut-off valve slowly then bleed air in the reservoir tank.
  3. Install the brake reservoir tank cap.
scientia non olet · About LEMON Manuals