LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Ioniq Hybrid SEL >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System (HEV) >> Front Disc Brake >> Repair Procedures >> Inspection >> Front Brake Pad Check

Front Brake Pad Check

  1. Check the pad wear. Measure the pad thickness and replace it, if it is less than the specified value.

    Pad thickness 

    Standard value: 17 mm (0.67 in)

    Service limit: 8.0 mm (0.31in)

  2. Check that grease is applied, to sliding contact points. Check for metal damage to the pad and backing.
    G13850527Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals