LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Ioniq Hybrid SEL >> Repair and Diagnosis >> Brakes >> Anti-Lock Brakes >> ESC/AHB Diagnosis (HEV) >> DTC C1623-08: CAN Time-Out Steering Angle Sensor >> DTC Inspection >> Monitor DTC Status

Monitor DTC Status

  1. Connect GDS and select "Diagnostic Trouble Codes (DTC)" mode.
  2. Confirm that "DTC Readiness Flag" indicates "COMPLETED". If not, drive the vehicle within conditions noted in the freeze frame data or enable conditions.
  3. Read "DTC Status" parameter in DTC menu of the GDS.
    G13840078Courtesy of HYUNDAI MOTOR AMERICA
  4. Is parameter displayed "History (Not Present) fault"?

    YES 

    • Fault is intermittent caused by poor connection and/or IBAU's connector or was repaired and IBAU memory was not cleared. Go to "Verification of Vehicle Repair " procedure.

    NO 

    • Go to next step.
scientia non olet · About LEMON Manuals