LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Ioniq Hybrid SEL >> Repair and Diagnosis >> Brakes >> Anti-Lock Brakes >> Active Hydraulic Boost (AHB) System (HEV) >> Repair Procedures >> AHB Brake System Bleeding Procedure >> Air Bleeding Tool Removal Procedure

Air Bleeding Tool Removal Procedure

  1. To remove the SST (09580-3D100) from the vehicle, close the air shut-off valve (A) first.
    G13850634Courtesy of HYUNDAI MOTOR AMERICA
  2. Remove SST (09580-3D100) and the cap of SST (0K585-E8100) on the reservoir tank.
    G13850635Courtesy of HYUNDAI MOTOR AMERICA
    NOTE:
    • To prevent backflow of brake fluid, be sure to open the air shut-off valve slowly then bleed air in the reservoir tank.
  3. Install the brake reservoir tank cap.
scientia non olet · About LEMON Manuals