LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Ioniq Hybrid SEL >> Repair and Diagnosis >> Brakes >> Anti-Lock Brakes >> Active Hydraulic Boost (AHB) System (HEV) >> Hydraulic Power Unit >> Repair Procedures >> Installation

Repair Procedures: Installation

  1. Installation is the reverse of removal.
  2. Tighten the PSU bracket bolts and brake tube to the specified torque.
  3. After filling the brake fluid in the reservoir, perform the air bleed.

    (Refer to "AHB Brake System Bleeding Procedure ")

  4. Conduct Pressure Sensor Calibration.
  5. Check the brake pedal operation.
scientia non olet · About LEMON Manuals