LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Ioniq Hybrid SEL >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Hood Assembly (HEV) >> Hood Latch Release Handle >> Repair Procedures >> Replacement

Repair Procedures: Replacement

  1. Using a socket (B), remove the hood release handle (A).
    G13850719Courtesy of HYUNDAI MOTOR AMERICA
  2. To install, reverse the removal procedure.
    NOTE:
    • Make sure the hood latch cable is connected properly.
    • Make sure the hood locks/unlocks and opens/closes properly.
scientia non olet · About LEMON Manuals