LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Ioniq Hybrid SEL >> Repair and Diagnosis >> Accessories & Equipment >> Steering Column Switches >> MULTIFUNCTION Switch (HEV) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the steering wheel.

    (Refer to Steering System - "STEERING WHEEL ")

  3. Remove the steering column upper and lower shrouds after loosening the screws.

    (Refer to Body - "STEERING COLUMN SHROUD PANEL ")

  4. Remove the clock spring.

    (Refer to Restraint - "DRIVER AIRBAG (DAB) MODULE AND CLOCK SPRING ")

  5. Disconnect the multifunction switch connector (A).
    G13851166Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the multifunction switch assembly (A) after loosening the screws.
    G13851167Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals