LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Ioniq Hybrid SEL >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Body Side Molding (HEV) >> Front Wheel Guard >> Repair Procedures >> Replacement

Repair Procedures: Replacement

CAUTION:
  • Put on gloves to prevent hand injuries.
NOTE:
  • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
  • Take care not to scratch the body surface.
  1. Remove the front tire.
  2. After loosening the mounting clips and remove the front wheel guard (A).
    G13850826Courtesy of HYUNDAI MOTOR AMERICA
  3. To install, reverse the removal procedure.

    Information 

    • Replace any damaged clips (or pin-type retainers).