| DTC Strategy |
|
- Variant coding error
- Faulty LDWS Module
- Faulty AEB(SCC) Module
|
| Enable conditions |
Case 1)
- Battery voltage is between 9 volt and 16 volt and the ignition switch is on condition.
Case 2)
- It has 2 seconds delay after ignition switch is on.
- Battery voltage is between 9 volt and 16 volt.
- No CAN Bus Off
|
| Threshold value |
- When the specification is not selected in AEB(SCC) Module or the specification is incorrectly selected with actual vehicle specification.
Case 1)
- The specification setting is not selected.
Case 2)
- The specification setting is not incorrectly selected.
|
| Diagnosis Time |
Case 1) 1 time
Case 2) 6 seconds |
| Fail Safe |
- SCC/AEB Disengagement/Shutdown
- SCC/AEB Warning lamp turns 'ON'
|