LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Ioniq Hybrid SEL >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Autonomous Emergency Braking (AEB) System Diagnosis (HEV) >> DTC C1616-88: C-CAN Bus Off >> Wiring Inspection >> CAN Register and Communication Line Inspection >> CAN Register and Communication Line Inspection 2

CAN Register and Communication Line Inspection 2

  1. Ignition switch 'OFF'.
  2. Disconnect cluster and IGPM connectors.
  3. Measure resistance between terminal C-CAN Low and C-CAN High of Cluster. (component side)
  4. Measure resistance between terminal C-CAN Low and C-CAN High of IGPM. (component side)

    Specification  : Approximately 120 Ω

  5. Is the measured value within specification?

    YES 

    • Go to next procedure.

    NO 

    • If the measured value is out of specification, repair or replace CAN Register (120Ω, inside of cluster and IGPM), and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.
scientia non olet · About LEMON Manuals