LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Ioniq Hybrid SEL >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Blind Spot Detection Diagnosis - Left (HEV) >> DTC C2703-54: Right Control Module Slave Missing Calibration >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

Item Detecting Condition Possible Cause
DTC Strategy
  • Check the installation angle or perform the calibration
  1. BSD Installation angle failure
Enable Condition
  • IG ON
Threshold Value
  • Immediately
Detecting Time
  • When sensor installation angle is out of specification range. (correction angle: specification range plus or minus 5 degree)
scientia non olet · About LEMON Manuals