LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Ioniq Hybrid SEL >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Blind Spot Detection Diagnosis - Left (HEV) >> DTC C1628-87: CAN Time-Out Cluster >> DTC Inspection >> Monitor GDS Data

Monitor GDS Data

  1. Connect GDS to Data Link Connector(DLC).
  2. IGN "ON".
  3. Using GDS, check if there is an error in Cluster system.

    If there is an error in Cluster system, first do a troubleshooting for those system and then check BSD system.

  4. Are any DTCs present?

    YES 

    • Go to next procedure.

    NO 

scientia non olet · About LEMON Manuals